As the seasons change in Calgary, fall is usually when we start noticing what summer left behind. Months of heat, sun exposure, and outdoor activity often show up as dark spots, stubborn redness, visible capillaries, or sudden acne breakouts. And if you’re wondering what aerolase laser is, you’re in the right place.
If you’re looking to clear post-summer sun damage or manage an ongoing skin condition, this guide covers everything you need to know about Aerolase® Laser: how it works, what conditions it treats, and what to expect from your personalized care plan at Juvea Aesthetics.
What Is Aerolase Laser?
Aerolase is a non-invasive laser treatment designed to clear, restore, and balance your skin, without the pain or recovery time you might expect from traditional laser therapies. Instead of causing harsh surface irritation or peeling, Aerolase delivers gentle, high-energy light pulses deep into your skin to treat targeted concerns.
At Juvea Aesthetics, we deal with the Aerolase Neo Elite: the specific device built around Aerolase’s advanced 1064nm Nd:YAG technology and proprietary 650-microsecond pulse.
What makes the Neo Elite so special is its versatility. Most traditional medical lasers are built for just one job: an IPL handles surface redness, a fractional laser works on texture, and an ablative laser does deeper resurfacing. Where the Neo Elite uses one refined wavelength and pulse duration to tackle all three at once, with your provider adjusting the energy, pass count, and technique to match your exact skin needs in a single visit, no matter if we’re calming an active acne breakout, fading dark spots, or settling facial redness.
How Does Aerolase Laser Work?
Aerolase delivers laser energy so quickly that your skin never has a chance to overheat, which is what makes the treatment comfortable, effective, and safe across all skin tones. Traditional lasers deliver energy over longer pulse durations, causing heat to build up on the skin’s surface. This surface heating is the primary source of pain during laser treatments and significantly increases the risk of burns or post-inflammatory hyperpigmentation (PIH) on melanin-rich skin.
Aerolase’s proprietary 650-microsecond pulse solves this by passing through the upper layer of skin before surface heat can accumulate. By delivering high energy deep into the dermis at rapid speed, it eliminates the need for messy cooling gels, numbing creams, or cold air blasts. Most clients at Juvea feel only a gentle, completely tolerable warming sensation.
Below the surface, the 1064nm wavelength selectively targets water, melanin, and hemoglobin in the skin. By heating these underlying targets without harming the outer layer, the laser safely neutralizes bacteria, breaks down unwanted pigment, coagulates visible blood vessels, and triggers your skin’s natural collagen production. This mechanism is backed by published research, including studies on its use for acne vulgaris and for melasma when paired with microneedling.
What Does Aerolase Laser Treat?
Whatever brought you here – persistent acne, sun damage, stubborn redness, or simply wanting brighter, more even-toned skin, there is a good chance Aerolase can address it. It’s licensed to treat one of the widest ranges of skin conditions of any single laser available in Canada.
What changes from client to client isn’t the technology, it’s how we adjust the energy, passes, and technique for your skin. We’ve grouped these concerns below by how the laser works to resolve them, which also determines how many sessions you’ll likely need:
Concern Category | What It Includes | How Aerolase Treats It |
|---|---|---|
Acne & Breakouts | Active and cystic acne, post-acne redness, acne scarring and textural irregularities | Targets the bacteria and follicular inflammation that drive breakouts while calming surrounding redness. |
Redness & Vascular Concerns | Rosacea and facial flushing, broken capillaries, spider and leg veins, port wine stains, benign vascular lesions (hemangiomas, angiomas), post-injection bruising | Selectively coagulates the small blood vessels responsible for visible redness, clearing them without disrupting surrounding tissue |
Pigmentation & Sun Damage | Melasma, sun spots and age spots, post-inflammatory hyperpigmentation (PIH), other pigmented lesions | Breaks down excess melanin at the source, fading discolouration from within the dermis rather than lifting it off the surface |
Aging, Texture & Firmness | Fine lines and wrinkles, uneven tone and texture, enlarged pores, loss of elasticity | Delivers controlled thermal energy into the deep dermis to stimulate new collagen production, gradually firming and refining the skin. |
Inflammatory & Chronic Skin Conditions | Eczema and dermatitis, psoriasis, keratosis pilaris (KP), general inflammation, milia, skin tags, and other benign cutaneous lesions | Reduces localized inflammation at the skin level |
Ingrown Hairs & Razor Bumps | Pseudofolliculitis barbae (PFB), unwanted hair, a concern we see often with our male clients | Targets the follicle and surrounding inflammation to reduce ingrown hairs and support hair reduction |
Scarring, Stretch Marks & Nails | Scars, stretch marks (striae), nail and fungal concerns, warts | Stimulates collagen remodelling in scarred or textured tissue to gradually improve surface irregularities. |
This approach is backed by published clinical research, including studies on Aerolase’s use for acne, rosacea and vascular redness, melasma and pigmentation, psoriasis and inflammatory conditions, and PFB and ingrown hairs.
Whatever combination of these categories applies to you, the next step is a consultation, where we translate this into your specific plan: which areas we treat first, how we sequence them, and how many sessions each concern realistically needs.
Aerolase treats even more than what’s outlined here. Learn more here, or book a consultation to talk through your specific concerns.
What Makes Aerolase Different From Other Lasers?
With so many treatment options available in Calgary, understanding how technologies differ helps you make the right choice for your skin. Aerolase focuses on refining surface tone and strengthening your skin’s underlying collagen matrix.
Here is how Aerolase compares to conventional lasers:
Feature | Traditional Lasers | Aerolase Neo Elite |
|---|---|---|
Contact or cooling required | Often needs cooling gel, cold air, or contact cooling | No contact or cooling required |
Comfort | Can involve significant heat and discomfort | Mild, brief warming sensation |
Use on melanin-rich | Higher risk of burns and PIH on deeper skin tones | Developed for safe use across the full Fitzpatrick scale (I-VI). |
Conditions treated | Typically built for one or two specific concerns | Licensed to treat dozens of distinct skin conditions |
Downtime | Ranges from several days to two weeks | None, return to normal activity immediately |
Sun sensitivity | Often requires strict sun avoidance for weeks | Suitable for use and maintenance year-round with daily SPF |
Am I a Good Candidate for Aerolase Laser?
Aerolase is FDA-cleared to treat 36+ distinct skin conditions, which is why candidacy here is exceptionally broad. It’s suitable for all ages and all skin types, including sensitive and melanin-rich skin, from teens managing severe acne to adults looking to reverse the first signs of aging.
You are likely an ideal candidate if you want to address:
- Active Acne: Teens and adults managing persistent breakouts, inflammation, or post-acne marks.
- Pigmentation & Sun Damage: Anyone looking to clear melasma, sun spots, age spots, or uneven skin tone.
- Redness & Flushing: Those dealing with rosacea, diffuse facial redness, or visible blood vessels.
- Wrinkles & Skin Renewal: Anyone seeking to smooth fine lines and wrinkles, refine texture, and achieve firmer skin.
- Razor Bumps & Ingrown Hairs: Men and women struggling with pseudofolliculitis barbae (PFB), ingrown hairs, or enlarged pores. A concern men in particular love treating with Aerolase, alongside pore reduction and scarring.
- Port-Wine Stains: Also suitable for children being treated specifically for port-wine stains, under the guidance of our provider team.
When to Pause or Defer Treatment: a few specific situations call for holding off until your skin has fully recovered:
- Active skin infections or open wounds in the treatment zone
- Current or recent use of Accutane (isotretinoin)
- Active skin cancer, or any unassessed or suspicious skin lesion, in the treatment area
Your treatment plan at Juvea Aesthetics begins with an in-depth consultation to ensure Aerolase is the safest, most effective path toward your skin goals.
What to Expect During Treatment
There’s very little preparation needed. Treatment length depends on the area (or areas) being treated (typically 10-40 minutes) and because Aerolase doesn’t require numbing cream or cooling gel, there’s no extra prep time before we begin.
Most clients describe the sensation as a tolerable, mild warmth as the laser passes over the skin, nothing close to the sharper heat associated with older laser technology.
And once you’re done, there’s nothing to recover from. You can reapply makeup, head back to work, and pick your normal skincare routine, right back up the same day. This lack of surface irritation is also why we’re able to combine Aerolase with other treatments, like microneedling or injectables, in the same visit when that fits your plan.
How Many Sessions Will I Need?
Aerolase Laser works progressively, but most clients notice some initial improvement in redness or active breakouts within the first few days. Cumulative results build with a series, and the right number of sessions and spacing depends on what you’re treating:
- Acne: 4-6 sessions, spaced 1-2 weeks apart
- Hyperpigmentation & Melasma: 3-5 sessions, spaced 3-4 weeks apart
- General Rejuvenation & Texture: 4-6 sessions, spaced 2-4 weeks apart
Once you’ve completed your initial series, many clients continue with periodic maintenance sessions, especially for chronic rosacea or ongoing hyperpigmentation, to keep results consistent through Calgary’s changing seasons.
How Much Does Aerolase Laser Cost in Calgary?
At Juvea Aesthetics, treatments start at $125 per session, with exact pricing depending on the concern and area being treated. We also offer discounted packages for a series of 6 sessions, as well as special member rates through our VIP membership.
The best way to get an accurate quote for your specific goals is during a complimentary skin consultation, where we’ll map out a recommended treatment plan and session count before you commit to anything.
Aerolase Laser Before & After
How Long Do Results Take, and How Long Do They Last?
Timelines depend on the mechanism behind the concern being treated:
- Acne & Redness: Initial reduction in active inflammation are common within days of your first session, but repeated treatments are needed for long-term results.
- Pigment & Vascular Lesions: Treated dark spots and vascular lesions fade progressively over your treatment series as the body naturally absorbs the targeted cells.
- Collagen & Texture: Structural collagen-building benefits become visible within 3-4 weeks, continuing to improve for months post-treatment.
Results are long-lasting but not permanent. Most clients maintain their progress with periodic maintenance treatments as skin continues to age, alongside a consistent daily SPF routine.
Why Choose Juvea Aesthetics for Aerolase in Calgary
Juvea Aesthetics was founded on the belief that the best aesthetic results start with understanding skin anatomy first and technology second. That same anatomy-led, science-based philosophy shapes how we use Aerolase.
Aerolase is safe across the full Fitzpatrick scale (I-VI). We customize pulse counts, energy settings, and pass techniques to your specific skin condition, whether that’s stubborn melasma, vascular redness, active cystic acne, or deep collagen renewal. Every treatment plan starts with a thorough assessment of your skin’s health, barrier integrity, and goals, so you know exactly what to expect for timeline, session count, and post-care.
We’re also able to seamlessly layer Aerolase into a multi-therapy treatment plan alongside medical-grade facials, gentle exfoliating peels, or dermaplaning, when a combination approach will reach your goals faster.
Combining Aerolase Laser With Other Treatments
Aerolase leaves no surface damage or irritation, allowing us to layer it into comprehensive treatment plans during the same visit.
Paired Treatment | Why We Combine Them |
|---|---|
Chemical Peels & Facials | Aerolase targets deep dermal collagen and redness while peels clear surface dead skin cells, accelerating overall clarity and brightness. |
Dermaplaning | Dermaplaning removes surface dead skin and peach fuzz immediately before your Aerolase session, allowing the laser’s energy to penetrate more evenly and enhancing your results without added irritation. |
Medical-Grade Skincare & Facials | A consistent medical-grade skincare routine and periodic facials extend your in-clinic results, supporting ongoing collagen stimulation and protecting skin between Aerolase sessions. |
Botox & Dermal Fillers | Botox and dermal fillers can make a complementary pairing. Aerolase refines skin tone, texture, and redness, while injectables address muscle movement and volume loss, helping you reach your full aesthetic goals faster. |
Frequently Asked Questions About Aerolase in Calgary
Does the treatment hurt?
Most clients describe the feeling as a gentle, soothing warmth against the skin. Over areas with higher pigment or active inflammation, you might feel a mild zap, similar to a rubber band flick or a drop of warm oil, but it’s generally pain-free.
Is there any downtime?
Virtually none. You may leave with a slight rosy glow or mild warmth that fades within minutes to an hour. You can immediately return to work, put on makeup, and go about your daily routine.
Is Aerolase safe for dark skin tones?
Yes. This is one of Aerolase’s primary strengths. Because the 650-microsecond pulse passes through the top layer of skin faster than melanin can absorb the heat, it’s safe for all Fitzpatrick skin types (I–VI), with minimal risk of burning or post-laser hyperpigmentation.
If a treatment doesn't hurt or cause peeling, is it actually working?
Downtime and pain aren’t measures of how well a treatment is working. Older ablative lasers rely on damaging the outer skin layers, which is why they require days of peeling to show results. Aerolase works beneath the surface instead – stimulating collagen and targeting bacteria or pigment in the deeper layers without ever damaging the skin’s surface.
Does Aerolase expose me to radiation?
No. Aerolase uses light in the visible and infrared spectrums, not ionizing radiation like X-rays or UV. The energy is purely light and thermal heat, so there’s no radiation exposure or internal tissue damage involved.
Discover What Aerolase Care Can Do for Your Skin
Your Aerolase journey begins with a thorough assessment of your skin’s health, barrier integrity, and goals. We’ll map out your customized treatment protocol and answer all your questions. We’re excited to bring out the healthiest version of your skin. Book Your Aerolase Consultation.